Replacing the battery of a Redmi Note 10 Pro requires some technical knowledge and careful handling. Here's a general guide on how you can change the battery of a Redmi Note 10 Pro:
Preparation:
- Ensure you have a replacement battery that is compatible with the Redmi Note 10 Pro. You can purchase a genuine battery from an authorized seller or a reputable retailer.
- Gather the necessary tools, such as a screwdriver set, prying tool, and a plastic card or opening pick.
- Power off your Redmi Note 10 Pro before proceeding.
Back Cover Removal:
- Locate the screws on the bottom edge of the phone.
- Use the appropriate screwdriver to remove these screws.
- Take the prying tool or your fingernail and gently insert it into the small gap between the back cover and the frame of the phone.
- Slowly and carefully pry the back cover away from the phone, starting from one corner and working your way around the edges. Apply even pressure to avoid damaging the cover or the phone.
Battery Removal:
- Once the back cover is removed, you will see the internal components of the phone.
- Locate the battery, which should be visible near the center of the device.
- Identify any connectors or adhesive strips holding the battery in place.
- If there are connectors, carefully disconnect them by gently pulling on the connector, making sure not to damage the wires or the connector itself.
- If there are adhesive strips, you may need to apply heat using a heat gun or a hairdryer to soften the adhesive. Then, use a plastic card or an opening pick to slowly and gently pry the battery away from the phone.
Battery Replacement:
- Take the new battery and align it properly with the battery slot.
- If there were connectors, reconnect them by gently inserting the connector into its corresponding socket.
- If there were adhesive strips, remove the protective film from the adhesive side of the new battery and carefully place it into position.
Reassembling:
- Carefully reattach the back cover to the phone, ensuring all edges are aligned.
- Apply slight pressure along the edges to secure the cover back into place.
- Use the screws to fasten the back cover securely.
Power On:
- Power on your Redmi Note 10 Pro to verify if the new battery is functioning correctly.
- Charge the device fully before using it for an extended period.
It's worth noting that opening your device and replacing the battery may void your warranty. If your phone is still under warranty, it's recommended to contact the manufacturer or an authorized service center for battery replacement.
we can see the the battery replacement in our youtube channel.lets watch it⇩⇩⇩